commercial 2000 SERIES WINDOWS
The MW Aluminum 2000 Series Heavy Commercial Windows are ideal for residential, commercial, school, hospital, mixed use and industrial projects using fixed, projected or casement windows. All ventilators are fully weather-stripped. MWC butt hinges are welded to frames to assure strength and alleviate unsightly rivets and screws. All extrusions are 6063-T6 or T5. Windows are assembled without the use of screws or fasteners. Frames and ventilators corners are mitered, reinforced with a 3/16" thick aluminum corner key and welded. All muntins are mortised and welded into the frame to form true divided lites (TDL). All windows have been tested and certified by a recognized testing laboratory to AAMA and NFRC standards.
Our MW Aluminum 2000 Heavy Commercial Windows will accommodate glazing thicknesses from 3/16" up to 1". Several muntins choices are available to accommodate various heights, aesthetics and structural specifications. Glazing stops are square as standard and some slope stops options are also available to simulate the look of traditional style putty glazed window and door products. TDL and sloped stops are popular in Architectural renovations or neighborhoods and communities that require submissions to Architectural Review Boards. This system is used where larger windows are required.
General Specifications:
MW Aluminum 2000 Series Heavy Commercial Windows as manufactured by Arcadia Custom: Window members are constructed from 6063-T6 aluminum alloy with all joints and corners welded. Frame members will be minimum .125" thickness and 2" in depth. Extruded aluminum glazing bead will be .050". Stucco nailing fins @ .064" minimum thickness; traditional heavy sill shall be .093†minimum thickness. All extrusions are welded for superior strength. Frames and ventilator corners are mitered, reinforced with a 3/16" corner key and welded.
Traditional surrounds and sills can be pressed on, welded and sealed at the factory or standard nailing fins can be used. Aluminum corner brackets are crimped and welded. Conventional casement and awning windows will have welded butt hinges unless alternate hinges are requested. Project-in and pushout ventilators shall be hinged on 4-bar scissor hinges at each end of ventilator. Hinges have sturdy stainless steel arms, and shall incorporate a sliding adjustable shoe operating in a stainless steel track. Hinges shall be factory installed using stainless steel screws. Ventilators shall be adjusted and locked shut at the factory and shall require no further attention. Screens are constructed of .020" nominal thickness frame stock, and screen mesh shall be 18X16 gauge grey fiberglass cloth, held in place by vinyl spline. Screens can be easily removed, requiring no special tools to do so.
I’ve used the The Metal Window before and it was great! I was pleased once again. Staff was very nice and really went the extra mile to help us out!
Ralph
Professionalism, Punctuality, Quality, Responsiveness, Value. Everyone was professional and offered amazing custom window service.
Christianna Sauer
California
